dmesg - 2012-04-15 12:40
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.0.0-19-generic (buildd@crested) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #32-Ubuntu SMP Thu Apr 5 18:22:38 UTC 2012 (Ubuntu 3.0.0-19.32-generic 3.0.27)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
Disabled fast string operations
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
BIOS-e820: 0000000040200000 - 00000000d9c9f000 (usable)
BIOS-e820: 00000000d9c9f000 - 00000000dae7f000 (reserved)
BIOS-e820: 00000000dae7f000 - 00000000daf9f000 (ACPI NVS)
BIOS-e820: 00000000daf9f000 - 00000000dafff000 (ACPI data)
BIOS-e820: 00000000dafff000 - 00000000db000000 (usable)
BIOS-e820: 00000000db000000 - 00000000dfa00000 (reserved)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed08000 - 00000000fed09000 (reserved)
BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000011fe00000 (usable)
NX (Execute Disable) protection: active
DMI 2.6 present.
DMI: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 03XK 01/04/2012
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x11fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0C0000000 mask FE0000000 write-back
3 base 0DC000000 mask FFC000000 uncachable
4 base 0DB000000 mask FFF000000 uncachable
5 base 100000000 mask FE0000000 write-back
6 base 11FE00000 mask FFFE00000 uncachable
7 base 0FFC00000 mask FFFC00000 write-protect
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xdb000 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000f00e0] f00e0
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000098000] 98000 size 20480
init_memory_mapping: 0000000000000000-00000000db000000
0000000000 - 00db000000 page 2M
kernel direct mapping tables up to db000000 @ 1fffb000-20000000
init_memory_mapping: 0000000100000000-000000011fe00000
0100000000 - 011fe00000 page 2M
kernel direct mapping tables up to 11fe00000 @ d9c99000-d9c9f000
RAMDISK: 365be000 - 372d7000
ACPI: RSDP 00000000000f0100 00024 (v02 SECCSD)
ACPI: XSDT 00000000daffe120 00084 (v01 SECCSD LH43STAR 00000002 PTEC 00000002)
ACPI: FACP 00000000daff0000 000F4 (v03 SECCSD LH43STAR 00000002 PTL 00000002)
ACPI: DSDT 00000000daff3000 07FFA (v02 SECCSD SNB-CPT 00000000 INTL 20061109)
ACPI: FACS 00000000daf3d000 00040
ACPI: SLIC 00000000daffd000 00176 (v01 SECCSD LH43STAR 00000002 PTEC 00000001)
ACPI: SSDT 00000000daffb000 01068 (v01 SECCSD PtidDevc 00001000 INTL 20061109)
ACPI: ASF! 00000000daff2000 000A5 (v32 SECCSD LH43STAR 00000002 PTL 00000002)
ACPI: HPET 00000000dafef000 00038 (v01 SECCSD LH43STAR 00000002 PTL 00000002)
ACPI: APIC 00000000dafee000 00098 (v01 SECCSD LH43STAR 00000002 PTL 00000002)
ACPI: MCFG 00000000dafed000 0003C (v01 SECCSD LH43STAR 00000002 PTL 00000002)
ACPI: SSDT 00000000dafec000 00804 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: SSDT 00000000dafeb000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109)
ACPI: UEFI 00000000dafea000 0003E (v01 SECCSD LH43STAR 00000002 PTL 00000002)
ACPI: UEFI 00000000dafe9000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
ACPI: UEFI 00000000dafe8000 0022E (v01 SECCSD LH43STAR 00000002 PTL 00000002)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000011fe00000
Initmem setup node 0 0000000000000000-000000011fe00000
NODE_DATA [000000011fdfb000 - 000000011fdfffff]
[ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011b400000-ffff88011edfffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0011fe00
Movable zone start PFN for each node
early_node_map[6] active PFN ranges
0: 0x00000010 -> 0x0000009d
0: 0x00000100 -> 0x00020000
0: 0x00020200 -> 0x00040000
0: 0x00040200 -> 0x000d9c9f
0: 0x000dafff -> 0x000db000
0: 0x00100000 -> 0x0011fe00
On node 0 totalpages: 1021485
DMA zone: 56 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3920 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 872664 pages, LIFO batch:31
Normal zone: 1785 pages used for memmap
Normal zone: 128775 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 0000000020000000 - 0000000020200000
PM: Registered nosave memory: 0000000040000000 - 0000000040200000
PM: Registered nosave memory: 00000000d9c9f000 - 00000000dae7f000
PM: Registered nosave memory: 00000000dae7f000 - 00000000daf9f000
PM: Registered nosave memory: 00000000daf9f000 - 00000000dafff000
PM: Registered nosave memory: 00000000db000000 - 00000000dfa00000
PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000
PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
Allocating PCI resources starting at dfa00000 (gap: dfa00000:18600000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88011fa00000 s79616 r8192 d22784 u262144
pcpu-alloc: s79616 r8192 d22784 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1005359
Policy zone: Normal
PCIe ASPM is forcedly enabled
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3930676k/4716544k available (6145k kernel code, 630604k absent, 155264k reserved, 6890k data, 988k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:744 16
Extended CMOS year: 2000
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1596.348 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.69 BogoMIPS (lpj=6385392)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Disabled fast string operations
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20110413
ftrace: allocating 25762 entries in 102 pages
x2apic not enabled, IRQ remapping init failed
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz stepping 07
Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 98000
Disabled fast string operations
#2
smpboot cpu 2: start_ip = 98000
Disabled fast string operations
#3
smpboot cpu 3: start_ip = 98000
Disabled fast string operations
Brought up 4 CPUs
Total of 4 processors activated (12770.51 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region at dae7f000 (1179648 bytes)
print_constraints: dummy:
Time: 9:37:30 Date: 04/15/12
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000dae70718 00688 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00688 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: SSDT 00000000dae71a98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: SSDT 00000000dae6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
_OSC request data:1 8 1f
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0xdfa00000-0xfeafffff]
pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
pci 0000:00:02.0: [8086:0116] type 0 class 0x000300
pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io 0x3000-0x303f]
pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
pci 0000:00:16.0: reg 10: [mem 0xf0705000-0xf070500f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
pci 0000:00:1a.0: reg 10: [mem 0xf070a000-0xf070a3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xf0700000-0xf0703fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
pci 0000:00:1d.0: reg 10: [mem 0xf0709000-0xf07093ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.0: [8086:1c49] type 0 class 0x000601
pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106
pci 0000:00:1f.2: reg 10: [io 0x3088-0x308f]
pci 0000:00:1f.2: reg 14: [io 0x3094-0x3097]
pci 0000:00:1f.2: reg 18: [io 0x3080-0x3087]
pci 0000:00:1f.2: reg 1c: [io 0x3090-0x3093]
pci 0000:00:1f.2: reg 20: [io 0x3060-0x307f]
pci 0000:00:1f.2: reg 24: [mem 0xf0708000-0xf07087ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0xf0704000-0xf07040ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
pci 0000:01:00.0: [8086:0091] type 0 class 0x000280
pci 0000:01:00.0: reg 10: [mem 0xf0600000-0xf0601fff 64bit]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff]
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:02:00.0: reg 10: [io 0x2000-0x20ff]
pci 0000:02:00.0: reg 18: [mem 0xf0404000-0xf0404fff 64bit pref]
pci 0000:02:00.0: reg 20: [mem 0xf0400000-0xf0403fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.3: PCI bridge to [bus 02-02]
pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
pci 0000:03:00.0: [1b21:1042] type 0 class 0x000c03
pci 0000:03:00.0: reg 10: [mem 0xf0500000-0xf0507fff 64bit]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff]
pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
_OSC request data:1 1f 1f
pci0000:00: Requesting ACPI _OSC control (0x1d)
_OSC request data:1 0 1d
pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009d800 - 000000000009ffff
reserve RAM buffer: 00000000d9c9f000 - 00000000dbffffff
reserve RAM buffer: 00000000db000000 - 00000000dbffffff
reserve RAM buffer: 000000011fe00000 - 000000011fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
Switched to NOHz mode on CPU #3
Switched to NOHz mode on CPU #2
Switched to NOHz mode on CPU #1
Switched to NOHz mode on CPU #0
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-3e]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cffff window]
pnp 00:00: [mem 0x000d0000-0x000d3fff window]
pnp 00:00: [mem 0x000d4000-0x000d7fff window]
pnp 00:00: [mem 0x000d8000-0x000dbfff window]
pnp 00:00: [mem 0x000dc000-0x000dffff window]
pnp 00:00: [mem 0x000e0000-0x000e3fff window]
pnp 00:00: [mem 0x000e4000-0x000e7fff window]
pnp 00:00: [mem 0x000e8000-0x000ebfff window]
pnp 00:00: [mem 0x000ec000-0x000effff window]
pnp 00:00: [mem 0x000f0000-0x000fffff window]
pnp 00:00: [mem 0xdfa00000-0xfeafffff window]
pnp 00:00: [mem 0xfed40000-0xfed44fff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x0000-0x001f]
pnp 00:01: [io 0x0081-0x0091]
pnp 00:01: [io 0x0093-0x009f]
pnp 00:01: [io 0x00c0-0x00df]
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [mem 0xff000000-0xffffffff]
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [io 0x00f0]
pnp 00:04: [irq 13]
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: [io 0x002e-0x002f]
pnp 00:05: [io 0x004e-0x004f]
pnp 00:05: [io 0x0061]
pnp 00:05: [io 0x0063]
pnp 00:05: [io 0x0065]
pnp 00:05: [io 0x0067]
pnp 00:05: [io 0x0070]
pnp 00:05: [io 0x0080]
pnp 00:05: [io 0x0092]
pnp 00:05: [io 0x00b2-0x00b3]
pnp 00:05: [io 0x0680-0x069f]
pnp 00:05: [io 0x1000-0x100f]
pnp 00:05: [io 0x5000-0x5003]
pnp 00:05: [io 0xffff]
pnp 00:05: [io 0x0400-0x0453]
pnp 00:05: [io 0x0458-0x047f]
pnp 00:05: [io 0x0500-0x057f]
pnp 00:05: [io 0x0a00-0x0a0f]
pnp 00:05: [io 0x164e-0x164f]
pnp 00:05: [io 0x5000-0x500f]
system 00:05: [io 0x0680-0x069f] has been reserved
system 00:05: [io 0x1000-0x100f] has been reserved
system 00:05: [io 0x5000-0x5003] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0x0400-0x0453] has been reserved
system 00:05: [io 0x0458-0x047f] has been reserved
system 00:05: [io 0x0500-0x057f] has been reserved
system 00:05: [io 0x0a00-0x0a0f] has been reserved
system 00:05: [io 0x164e-0x164f] has been reserved
system 00:05: [io 0x5000-0x500f] could not be reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [io 0x0070-0x0077]
pnp 00:06: [irq 8]
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: [io 0x0454-0x0457]
system 00:07: [io 0x0454-0x0457] has been reserved
system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:08: [io 0x0060]
pnp 00:08: [io 0x0064]
pnp 00:08: [irq 1]
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:09: [irq 12]
pnp 00:09: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
pnp 00:0a: [mem 0xfed10000-0xfed17fff]
pnp 00:0a: [mem 0xfed18000-0xfed18fff]
pnp 00:0a: [mem 0xfed19000-0xfed19fff]
pnp 00:0a: [mem 0xf8000000-0xfbffffff]
pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
pnp 00:0a: [mem 0xfed90000-0xfed93fff]
pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
pnp 00:0a: [mem 0xff000000-0xffffffff]
pnp 00:0a: [mem 0xfee00000-0xfeefffff]
pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: can't evaluate _CRS: 12311
system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
Freeing initrd memory: 13412k freed
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0: bridge window [io disabled]
pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff]
pci 0000:00:1c.0: bridge window [mem pref disabled]
pci 0000:00:1c.3: PCI bridge to [bus 02-02]
pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.3: bridge window [mem disabled]
pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: bridge window [io disabled]
pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff]
pci 0000:00:1c.4: bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:01: resource 1 [mem 0xf0600000-0xf06fffff]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1a.0: PCI INT A disabled
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:03:00.0: PCI INT A disabled
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800d5c99000 - ffff8800d9c99000
software IO TLB at phys 0xd5c99000 - 0xd9c99000
audit: initializing netlink socket (disabled)
type=2000 audit(1334482650.612:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.16)
msgmni has been set to 7703
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [ADP1] (off-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
ACPI: acpi_idle yielding to intel_idle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (38 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ERST: Table is not found!
ACPI: Battery Slot [BAT1] (battery present)
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 65536K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
brd: module loaded
loop: module loaded
Fixed MDIO Bus: probed
PPP generic driver version 2.4.2
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf070a000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf0709000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Magic number: 8:647:626
pci 0000:00:1b.0: hash matches
rtc_cmos 00:06: setting system clock to 2012-04-15 09:37:31 UTC (1334482651)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 988k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 2028k freed
Freeing unused kernel memory: 1388k freed
udevd[86]: starting version 173
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
r8169 0000:02:00.0: setting latency timer to 64
r8169 0000:02:00.0: (unregistered net_device): unknown MAC, using family default
r8169 0000:02:00.0: irq 40 for MSI/MSI-X
r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xffffc90000634000, e8:03:9a:28:bd:78, XID 0c900800 IRQ 40
xhci_hcd 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
xhci_hcd 0000:03:00.0: setting latency timer to 64
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:03:00.0: irq 16, io mem 0xf0500000
xhci_hcd 0000:03:00.0: irq 41 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708100 irq 46
ata2: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708180 irq 46
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708280 irq 46
ata5: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708300 irq 46
ata6: DUMMY
usb 1-1: new high speed USB device number 2 using ehci_hcd
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA6C0, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54505 GG2O PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 2-1: new high speed USB device number 2 using ehci_hcd
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
Refined TSC clocksource calibration: 1596.375 MHz.
Switching to clocksource tsc
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
usb 1-1.4: new high speed USB device number 3 using ehci_hcd
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: SanDisk iSSD P4 16GB, SSD 9.14, max UDMA/133
ata2.00: 31277232 sectors, multi 1: LBA48
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA SanDisk iSSD P4 SSD PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
ata4: SATA link down (SStatus 0 SControl 300)
usb 2-1.5: new full speed USB device number 3 using ehci_hcd
ata5: SATA link down (SStatus 0 SControl 300)
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
udevd[325]: starting version 173
Adding 3904508k swap on /dev/sda5. Priority:-1 extents:1 across:3904508k
lp: driver loaded but no devices found
mei: module is from the staging directory, the quality is unknown, you have been warned.
mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
mei 0000:00:16.0: setting latency timer to 64
[drm] Initialized drm 1.1.0 20060810
cfg80211: Calling CRDA to update world regulatory domain
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
iwlagn: Copyright(c) 2003-2011 Intel Corporation
iwlagn 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
iwlagn 0000:01:00.0: setting latency timer to 64
iwlagn 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0
iwlagn 0000:01:00.0: device EEPROM VER=0x716, CALIB=0x6
iwlagn 0000:01:00.0: Device SKU: 0Xb
iwlagn 0000:01:00.0: Valid Tx ant: 0X3, Valid Rx ant: 0X3
iwlagn 0000:01:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
iwlagn 0000:01:00.0: irq 47 for MSI/MSI-X
samsung_laptop: detected SABI interface: SwSmi@
samsung_laptop: Backlight controlled by ACPI video driver
i915 0000:00:02.0: irq 48 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
type=1400 audit(1334475454.385:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=688 comm="apparmor_parser"
type=1400 audit(1334475454.385:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=688 comm="apparmor_parser"
type=1400 audit(1334475454.385:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=688 comm="apparmor_parser"
EXT4-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
elantech: assuming hardware version 3, firmware version 69.15.0
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
iwlagn 0000:01:00.0: loaded firmware version 17.168.5.1 build 33993
Registered led device: phy0-led
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
elantech: Synaptics capabilities query result 0x08, 0x17, 0x0c.
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
Linux video capture interface: v2.00
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
uvcvideo: Found UVC 1.00 device WebCam SC-13HDL11431N (2232:1018)
elantech: x_max = 2940, y_max = 1400
acpi device:33: registered as cooling_device9
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 49 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
input: WebCam SC-13HDL11431N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input5
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v1.1.0)
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
hda_codec: ALC269: BIOS auto-probing.
HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
type=1400 audit(1334475455.413:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1330 comm="apparmor_parser"
type=1400 audit(1334475455.413:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1330 comm="apparmor_parser"
type=1400 audit(1334475455.413:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1330 comm="apparmor_parser"
type=1400 audit(1334475455.417:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=1329 comm="apparmor_parser"
type=1400 audit(1334475455.441:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1333 comm="apparmor_parser"
type=1400 audit(1334475455.445:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1333 comm="apparmor_parser"
ppdev: user-space parallel port driver
init: failsafe main process (1228) killed by TERM signal
init: apport pre-start process (1394) terminated with status 1
init: apport post-stop process (1420) terminated with status 1
ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:02:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x338 offMax=0x19e4
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.1.2_Ubuntu (interface 0x00190000).
vboxpci: IOMMU not found (not registered)
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: anacron main process (1414) killed by TERM signal
cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,commit=600
EXT4-fs (sda1): re-mounted. Opts: commit=600
usb 2-1.5: USB disconnect, device number 3
btusb_intr_complete: hci0 urb ffff8801151fe780 failed to resubmit (19)
btusb_bulk_complete: hci0 urb ffff88011848ea80 failed to resubmit (19)
btusb_bulk_complete: hci0 urb ffff88011848e3c0 failed to resubmit (19)
init: plymouth-stop pre-start process (2023) terminated with status 1
wlan0: authenticate with 00:1c:10:a2:c5:fa (try 1)
wlan0: authenticated
wlan0: associate with 00:1c:10:a2:c5:fa (try 1)
wlan0: RX AssocResp from 00:1c:10:a2:c5:fa (capab=0x411 status=0 aid=2)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
wlan0: deauthenticating from 00:1c:10:a2:c5:fa by local choice (reason=3)
cfg80211: All devices are disconnected, going to restore regulatory settings
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,commit=0
EXT4-fs (sda1): re-mounted. Opts: commit=0
init: anacron main process (2905) killed by TERM signal
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
sd 1:0:0:0: [sdb] Stopping disk
ehci_hcd 0000:00:1d.0: PCI INT A disabled
ehci_hcd 0000:00:1a.0: PCI INT A disabled
HDA Intel 0000:00:1b.0: PCI INT A disabled
PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 119.373 msecs
PM: suspend of drv:sd dev:0:0:0:0 complete after 572.619 msecs
PM: suspend of drv:scsi dev:target0:0:0 complete after 572.446 msecs
PM: suspend of drv:scsi dev:host0 complete after 572.078 msecs
PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 607.411 msecs
PM: suspend of drv: dev:pci0000:00 complete after 607.271 msecs
PM: suspend of devices complete after 619.628 msecs
PM: suspend devices took 0.620 seconds
r8169 0000:02:00.0: PME# enabled
r8169 0000:02:00.0: wake-up capability enabled by ACPI
PM: late suspend of devices complete after 95.952 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
CPU 1 is now offline
CPU 2 is now offline
Broke affinity for irq 1
Broke affinity for irq 9
CPU 3 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Extended CMOS year: 2000
Enabling non-boot CPUs ...
Booting Node 0 Processor 1 APIC 0x1
smpboot cpu 1: start_ip = 98000
Disabled fast string operations
CPU1 is up
Booting Node 0 Processor 2 APIC 0x2
smpboot cpu 2: start_ip = 98000
Switched to NOHz mode on CPU #1
Disabled fast string operations
CPU2 is up
Booting Node 0 Processor 3 APIC 0x3
smpboot cpu 3: start_ip = 98000
Switched to NOHz mode on CPU #2
Disabled fast string operations
CPU3 is up
Switched to NOHz mode on CPU #3
ACPI: Waking up from system sleep state S3
i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
mei 0000:00:16.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
mei 0000:00:16.0: restoring config space at offset 0x4 (was 0xfed0a004, writing 0xf0705004)
ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
ehci_hcd 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0xf070a000)
ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
HDA Intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0700004)
HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xf060f060)
pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x0, writing 0x200000f0)
pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
pcieport 0000:00:1c.3: restoring config space at offset 0xf (was 0x400, writing 0x40a)
pcieport 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0xf041f041)
pcieport 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
pcieport 0000:00:1c.3: restoring config space at offset 0x7 (was 0x0, writing 0x2020)
pcieport 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x10b)
pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xf050f050)
pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x0, writing 0xf0)
pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x109)
ehci_hcd 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0709000)
ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
iwlagn 0000:01:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b)
iwlagn 0000:01:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
iwlagn 0000:01:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006)
r8169 0000:02:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10a)
r8169 0000:02:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xf040000c)
r8169 0000:02:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xf040400c)
r8169 0000:02:00.0: restoring config space at offset 0x4 (was 0x1, writing 0x2001)
r8169 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
r8169 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
xhci_hcd 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
xhci_hcd 0000:03:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0500004)
xhci_hcd 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
xhci_hcd 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100402)
PM: early resume of devices complete after 1.741 msecs
i915 0000:00:02.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1a.0: setting latency timer to 64
HDA Intel 0000:00:1b.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ahci 0000:00:1f.2: setting latency timer to 64
r8169 0000:02:00.0: wake-up capability disabled by ACPI
iwlagn 0000:01:00.0: RF_KILL bit toggled to enable radio.
r8169 0000:02:00.0: PME# disabled
HDA Intel 0000:00:1b.0: irq 49 for MSI/MSI-X
xhci_hcd 0000:03:00.0: setting latency timer to 64
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
xhci_hcd 0000:03:00.0: irq 41 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
sd 0:0:0:0: [sda] Starting disk
sd 1:0:0:0: [sdb] Starting disk
Extended CMOS year: 2000
PM: resume of drv:hub dev:4-0:1.0 complete after 116.969 msecs
PM: resume of drv: dev:ep_00 complete after 116.873 msecs
PM: resume of drv:hub dev:3-0:1.0 complete after 117.241 msecs
PM: resume of drv: dev:ep_81 complete after 116.956 msecs
PM: resume of drv: dev:ep_81 complete after 117.104 msecs
PM: resume of drv: dev:ep_00 complete after 117.081 msecs
PM: resume of drv:hub dev:1-1:1.0 complete after 172.478 msecs
PM: resume of drv: dev:ep_00 complete after 172.458 msecs
PM: resume of drv: dev:ep_81 complete after 172.491 msecs
PM: resume of drv: dev:ep_00 complete after 176.276 msecs
PM: resume of drv:hub dev:2-1:1.0 complete after 176.317 msecs
PM: resume of drv: dev:ep_81 complete after 176.324 msecs
usb 1-1.4: reset high speed USB device number 3 using ehci_hcd
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata2.00: configured for UDMA/133
ata5: SATA link down (SStatus 0 SControl 300)
PM: resume of drv:sd dev:1:0:0:0 complete after 356.290 msecs
PM: resume of drv:scsi_device dev:1:0:0:0 complete after 356.319 msecs
PM: resume of drv:i915 dev:0000:00:02.0 complete after 392.163 msecs
PM: resume of drv:uvcvideo dev:1-1.4:1.0 complete after 650.902 msecs
PM: resume of drv:uvcvideo dev:1-1.4:1.1 complete after 650.883 msecs
PM: resume of drv: dev:ep_87 complete after 650.909 msecs
PM: resume of drv: dev:ep_00 complete after 650.806 msecs
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
PM: resume of drv:sd dev:0:0:0:0 complete after 2286.511 msecs
PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 2271.307 msecs
PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2286.544 msecs
PM: resume of devices complete after 2292.343 msecs
PM: resume devices took 2.292 seconds
PM: Finishing wakeup.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
[drm:drm_mode_getfb] *ERROR* invalid framebuffer id
init: anacron main process (3331) killed by TERM signal
EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,commit=600
EXT4-fs (sda1): re-mounted. Opts: commit=600
ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:02:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
wlan0: authenticate with 00:1c:10:a2:c5:fa (try 1)
wlan0: authenticated
wlan0: associate with 00:1c:10:a2:c5:fa (try 1)
wlan0: RX AssocResp from 00:1c:10:a2:c5:fa (capab=0x411 status=0 aid=2)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
wlan0: deauthenticating from 00:1c:10:a2:c5:fa by local choice (reason=3)
cfg80211: All devices are disconnected, going to restore regulatory settings
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,commit=0
EXT4-fs (sda1): re-mounted. Opts: commit=0
init: anacron main process (3747) killed by TERM signal
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
sd 1:0:0:0: [sdb] Stopping disk
ehci_hcd 0000:00:1a.0: PCI INT A disabled
ehci_hcd 0000:00:1d.0: PCI INT A disabled
HDA Intel 0000:00:1b.0: PCI INT A disabled
PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 118.507 msecs
PM: suspend of drv:sd dev:0:0:0:0 complete after 586.662 msecs
PM: suspend of drv:scsi dev:target0:0:0 complete after 586.550 msecs
PM: suspend of drv:scsi dev:host0 complete after 586.329 msecs
PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 618.553 msecs
PM: suspend of drv: dev:pci0000:00 complete after 618.285 msecs
PM: suspend of devices complete after 632.092 msecs
PM: suspend devices took 0.648 seconds
r8169 0000:02:00.0: PME# enabled
r8169 0000:02:00.0: wake-up capability enabled by ACPI
PM: late suspend of devices complete after 95.882 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
CPU 1 is now offline
CPU 2 is now offline
Broke affinity for irq 16
CPU 3 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Extended CMOS year: 2000
Enabling non-boot CPUs ...
Booting Node 0 Processor 1 APIC 0x1
smpboot cpu 1: start_ip = 98000
Disabled fast string operations
CPU1 is up
Booting Node 0 Processor 2 APIC 0x2
smpboot cpu 2: start_ip = 98000
Switched to NOHz mode on CPU #1
Disabled fast string operations
CPU2 is up
Booting Node 0 Processor 3 APIC 0x3
smpboot cpu 3: start_ip = 98000
Switched to NOHz mode on CPU #2
Disabled fast string operations
CPU3 is up
Switched to NOHz mode on CPU #3
ACPI: Waking up from system sleep state S3
i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
mei 0000:00:16.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
mei 0000:00:16.0: restoring config space at offset 0x4 (was 0xfed0a004, writing 0xf0705004)
ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
ehci_hcd 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0xf070a000)
ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
HDA Intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0700004)
HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xf060f060)
pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x0, writing 0xf0)
pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
pcieport 0000:00:1c.3: restoring config space at offset 0xf (was 0x400, writing 0x40a)
pcieport 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0xf041f041)
pcieport 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
pcieport 0000:00:1c.3: restoring config space at offset 0x7 (was 0x0, writing 0x2020)
pcieport 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x10b)
pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xf050f050)
pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x0, writing 0xf0)
pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x109)
ehci_hcd 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0709000)
ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
iwlagn 0000:01:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b)
iwlagn 0000:01:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
iwlagn 0000:01:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100406)
r8169 0000:02:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10a)
r8169 0000:02:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xf040000c)
r8169 0000:02:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xf040400c)
r8169 0000:02:00.0: restoring config space at offset 0x4 (was 0x1, writing 0x2001)
r8169 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
r8169 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
xhci_hcd 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
xhci_hcd 0000:03:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0500004)
xhci_hcd 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
xhci_hcd 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100402)
PM: early resume of devices complete after 1.741 msecs
i915 0000:00:02.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1a.0: setting latency timer to 64
HDA Intel 0000:00:1b.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ahci 0000:00:1f.2: setting latency timer to 64
HDA Intel 0000:00:1b.0: irq 49 for MSI/MSI-X
iwlagn 0000:01:00.0: RF_KILL bit toggled to enable radio.
r8169 0000:02:00.0: wake-up capability disabled by ACPI
r8169 0000:02:00.0: PME# disabled
xhci_hcd 0000:03:00.0: setting latency timer to 64
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
xhci_hcd 0000:03:00.0: irq 41 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
sd 1:0:0:0: [sdb] Starting disk
sd 0:0:0:0: [sda] Starting disk
Extended CMOS year: 2000
PM: resume of drv: dev:ep_00 complete after 116.224 msecs
PM: resume of drv:hub dev:3-0:1.0 complete after 116.428 msecs
PM: resume of drv: dev:ep_81 complete after 116.429 msecs
PM: resume of drv: dev:ep_00 complete after 119.604 msecs
PM: resume of drv:hub dev:4-0:1.0 complete after 120.039 msecs
PM: resume of drv: dev:ep_81 complete after 119.651 msecs
PM: resume of drv:hub dev:1-1:1.0 complete after 171.260 msecs
PM: resume of drv: dev:ep_00 complete after 171.246 msecs
PM: resume of drv: dev:ep_81 complete after 171.271 msecs
PM: resume of drv:hub dev:2-1:1.0 complete after 175.083 msecs
PM: resume of drv: dev:ep_00 complete after 175.055 msecs
PM: resume of drv: dev:ep_81 complete after 175.082 msecs
usb 1-1.4: reset high speed USB device number 3 using ehci_hcd
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata5: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
PM: resume of drv:sd dev:1:0:0:0 complete after 355.099 msecs
PM: resume of drv:scsi_device dev:1:0:0:0 complete after 355.127 msecs
PM: resume of drv:i915 dev:0000:00:02.0 complete after 388.142 msecs
PM: resume of drv:uvcvideo dev:1-1.4:1.0 complete after 649.820 msecs
PM: resume of drv:uvcvideo dev:1-1.4:1.1 complete after 649.800 msecs
PM: resume of drv: dev:ep_87 complete after 649.827 msecs
PM: resume of drv: dev:ep_00 complete after 649.790 msecs
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
PM: resume of drv:sd dev:0:0:0:0 complete after 2281.085 msecs
PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 2238.763 msecs
PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2281.121 msecs
PM: resume of devices complete after 2288.146 msecs
PM: resume devices took 2.288 seconds
PM: Finishing wakeup.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
[drm:drm_mode_getfb] *ERROR* invalid framebuffer id
init: anacron main process (4174) killed by TERM signal
EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,commit=600
EXT4-fs (sda1): re-mounted. Opts: commit=600
ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:02:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
wlan0: authenticate with 00:1c:10:a2:c5:fa (try 1)
wlan0: authenticated
wlan0: associate with 00:1c:10:a2:c5:fa (try 1)
wlan0: RX AssocResp from 00:1c:10:a2:c5:fa (capab=0x411 status=0 aid=2)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
usb 2-1.5: new full speed USB device number 4 using ehci_hcd
usb 3-1: new high speed USB device number 2 using xhci_hcd
usb 3-1: ep 0x84 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 3-1: ep 0x85 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 3-1: ep 0x5 - rounding interval to 32768 microframes, ep desc says 0 microframes
usbcore: registered new interface driver uas
Initializing USB Mass Storage driver...
scsi6 : usb-storage 3-1:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
scsi 6:0:0:0: Direct-Access HTC Android Phone 0100 PQ: 0 ANSI: 2
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: [sdc] 3862528 512-byte logical blocks: (1.97 GB/1.84 GiB)
sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sdc: detected capacity change from 1977614336 to 0
usb 3-1: USB disconnect, device number 2
sd 6:0:0:0: [sdc] Synchronizing SCSI cache
sd 6:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
CPU2: Package power limit notification (total events = 1)
CPU0: Package power limit notification (total events = 1)
CPU3: Package power limit notification (total events = 1)
CPU1: Package power limit notification (total events = 1)
CPU1: Package power limit normal
CPU0: Package power limit normal
CPU2: Package power limit normal
CPU3: Package power limit normal
[Hardware Error]: Machine check events logged